Fire Alarm Control Panel
Description
| Model Number: | CM-P1 |
| Brand Name: | CM |
| Place of Origin: | Taiwan |
Product Details
Other Usage:
This unit can be integrated with the broadcasting mainframe and emergency telephone mainframe produced by the Company into a three-in-one unit, so as to achieve the consistency of the box and its
appearance.
Appearance:
The circuit indication panel of this unit adopts advanced heat-resistant plastic material, simple but elegant in appearance and outline, with clear indication of matched circuit indicating
nameplate, building number, story and circuit attribute.
Human-oriented Design:
All the internal base plates adopt a module design, with the internal terminal boards separated from each other and protective measures adopted for input. In case that the site requires external
electricity to be connected with the circuit board, all that needs to be done is to replace this particular circuit board without removing external wires, enormously enhancing the efficiency of
maintenance and detection.
Quality Control:
The switch on the guidance panel and all the components of the internal base plate have been granted CNS quality certification. The mainframe must go through strict testing before leaving the
factory so as to ensure its normal operation.
Reserve Power Supply Protective Device:
In case of power failure, discharge of the reserve power supply will automatically stop when it is below DC18V, so as to extend the service life of the battery.
Accumulation Function:
Warning will not take place until circuit detection is confirmed after a certain period of time, so as to reduce the interference and reporting mistakes of ordinary circuits and enhance the
reliability of the mainframe.
Automatic Testing Function:
This unit can act on the circuits inside the mainframe or conduct automatic scanning testing of disconnection, making maintenance and detection much easier, enhancing operating efficiency and
reliability of the mainframe. (An above-75L model has automatic testing function; a below-70L model can choose to be equipped with this function.)
Manual Call Point
- Model Number:CM-P1
- Brand Name:CM
- Place of Origin:Taiwan
You may also like
Relate products of Fire Alarm Control Panel
Fire Alarm for Energy Storage Power Station Energy storage power station with fire detection devices in real time collection and the surrounding area environment temperature, concentration of carbon monoxide, hydrogen concentration and the concentration of VOC and smoke ...
Fire Alarm Controller for Energy Storage Power Station The Fire alarm controller is set in each energy storage cabin, with alarm signal acquisition with the cabin detector, start the Fire extinguishing device, linkage alarm, linkage communication with BMS and other functions. ...
Certified up to FD120, our 6 Panel white fireproof doors gives you up to 2 hours of fire protection for your property. These steel doors are also FD30 and FD60 rated should you require certification to this level. These 6 panel 30 min fire door also feature a multi point ...
Certified up to FD120, our 6 Panel white fireproof doors gives you up to 2 hours of fire protection for your property. These steel doors are also FD30 and FD60 rated should you require certification to this level. These 6 panel 30 min fire door also feature a multi point ...
The Network Fault Monitoring RTU RTU5028E is special designed for remote monitoring Ethernet devices communication status and power supply status. It can detect the Ethernet device fault caused by power supply or network communication. If network communication fault, it can ...
S150 is a cost-effective Cellular SMS Controller. The SMS controller features 8 digital inputs, 2 relay outputs, it can be connected to various detectors, such as water level detectors, door sensors, infrared detectors, temperature detectors, humidity detectors, water immersion ...
Features ● Network port balanced output audio ● Audio signal level indicator ● Partition source control and volume control ● With digital screen & 24VDC power supply ● MP3 play and independent volume control knob ● 1 line input and independent volume control knob ...
Cellular IoT RTU S270 is a wireless industrial IoT data monitoring and remote control unit, which is an ideal solution for remote data monitoring, data acquisition, remote control, and real time alarm. The RTU features 2 digital inputs, 2 analog inputs, 2 relay outputs, 1 ...
Control Panel / Terminal Blocks Mounting Rail 35mm DIN Making Machine. Guarantee of Quality https://www.superdamc.com Superda guarantee Channel roll former line design accordance with clients required drawing, machine is brand new. Specification and performance as stipulated in ...
The GSM 3G 4G Remote Controller Alarm is an industrial class, high reliability, high stability Remote Control and Alarm Unit. It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module, provides 2 relay outputs, 2 digital inputs and USB Serial ...