Electric Self Feed Drill Units

• Model 50 Hz 60 Hz Chuck Weight
  Speed Speed Capacity Standard
  rpm rpm mm kg
  DD5AE03B 300 360 10 11.1
  DD5AE05B 500 600 10 11.2
  DD5AE08B 800 960 10 11.2
  DD5AE11B 1100 1320 10 11.6
  DD5AE15B 1500 1800 10 11.4
  DD5AE19B 1900 2280 10 11.1
  DD5AE28B 2800 3360 10 11.2
  DD5AE38B 3800 4560 10 11.3
  DD5AE52B 5000 6240 10 11.4
  DD5AE65B 6500 7800 10 11.6
  Electric Self Feed Drill Units
  Drill Speed Selection Chart Material and Recommended Cutting Speeds
  Drill Dia. Aluminium Brass Mild Steel Cast Iron Alloy Steel 50 ton Alloy Steel 80 ton Wood
  mm in 150/200 ft/min 100/200 ft/min 100/120 ft/min 100-150 ft/min 30-50 ft/min 10-20 ft/min 300 ft/min
  45-60 m/min 30-45 m/min 30-36 m/min 30-45 m/min 9-15 m/min 3-6 m/min 90 m/min
  1.5 1/16 DD5AE65B DD5AE65B DD5AE52B DD5AE52B DD5AE38B DD5AE28B DD5AE65B
  2.0 3/32 DD5AE65B DD5AE65B DD5AE38B DD5AE38B DD5AE28B DD5AE19B DD5AE65B
  3.0 1/8 DD5AE52B DD5AE52B DD5AE28B DD5AE28B DD5AE19B DD5AE15B DD5AE65B
  4.0 5/32 DD5AE38B DD5AE38B DD5AE28B DD5AE28B DD5AE15B DD5AE11B DD5AE65B
  4.5 3/16 DD5AE38B DD5AE38B DD5AE19B DD5AE19B DD5AE11B DD5AE08B DD5AE65B
  5.5 7/32 DD5AE28B DD5AE28B DD5AE15B DD5AE15B DD5AE11B DD5AE08B DD5AE52B
  6.5 1/4 DD5AE28B DD5AE28B DD5AE15B DD5AE15B DD5AE08B DD5AE05B DD5AE52B
  7.0 9/32 DD5AE19B DD5AE19B DD5AE11B DD5AE11B DD5AE05B DD5AE03B DD5AE52B
  8.0 5/16 DD5AE19B DD5AE19B DD5AE11B DD5AE11B DD5AE05B DD5AE03B DD5AE52B
  9.0 11/32 DD5AE15B DD5AE15B DD5AE08B DD5AE08B DD5AE05B - DD5AE38B
  10.0 3/8 DD5AE15B DD5AE15B DD5AE05B DD5AE05B DD5AE03B - DD5AE38B
  Unit Selection Guide
  The following chart is
  intended as a guide only for
  tool selection. Its important to
  remember that speed and
  horsepower requirements vary
  due to drill type and material.
  To use this chart:
  Select the type of material
  being drilled. Then, look at the
  Drill Dia column for that
  desired hole size. The matrix
  will show the drill model
  number that should meet the
  drilling requirements.
  Technical Data
  Stroke Length 75 mm (3")
  Air Connections (for Cylinder) 1/4 BSP (female)
  Motor - 3 phase supply voltage
  Output Supply Frequency
  kw Voltage Hz Amps Hz Amps
  0.25 220 - 240- 50 1.3
  0.25 380 - 420 Y 50 0.75
  0.30 220 - 280- 60 1.2
  0.30 440 - 480 Y 60 0.75
  Minimum Working Pressure 3 bar (40 psi)
  Maximum Working Pressure 7 bar (100 psi )
  Normal Working Pressure 6 bar (85 psi)
  Max. Air Con. at 6 bar (85 psi) 0.472 l/s
  1 scfm per 25 strokes
  or 0.0188 l/s
  0.04 scfm per stroke
  Noise Level 70 dB(A)
  Min. Thrust at 6 bar 85 (psi) 63.5kg (140 lbf.)
  Feed Rates Advance - 305mm/sec
  (12 in/sec max.)
  Retract - 305mm/sec
  (12 in/sec max.)

Retract - 305mm/sec
(12 in/sec max.)