Model Number: | HC50 TYPE |
1. Can cut holes up to 50mm thick. 2. The cutting length is 70mm. 3. Special designed cutting edges4. The special tooth arrangement makes cutting smooth. 5. The cutting edges can be re-sharpened. 6. Can be run at higher speeds and higher feed rates. 7. Three times faster than regular drills. 8. The ejector pin ejects the slug when cutting is finished. 9. The hole cutters are suitable for all kinds of magnetic drilling machines, e. G. Nitto, hougen, jancy, fein, alfra, euroboor, etc
1. Can cut holes up to 50mm thick.
2. The cutting length is 70mm.
3. Special designed cutting ed
Application:Cutting Place of Origin:China (Mainland) High Cr-v Steel Blade, Cutting Edges Induction Quenched Humanity Design in Handle Easy Adjustment. ...
Model Number:HW60 1. Can cut materials up to 60mm thick. 2. The cutting length is 60mm. 3. Tungsten carbide tipped ...
Model Number:PL 1. Can cut materials up to 5mm thick. 2. The cutting length is 22mm. 3. Tungsten carbide tipped ...
Model Number:HC110 1. Can cut holes up to 110mm thick. 2. The cutting length is 120mm. 3. Special designed cutting ...
Model Number:HC75 1. Can cut holes up to 75mm thick. 2. The cutting length is 90mm. 3. Special designed cutting ed ...
T.C.T. Hole Cutter Type HCD 50.75 (GFB P10-11) ...
T.C.T. Hole Cutter Type HC 100 (GFB P10-11) ...
T.C.T. Hole Cutter Type HC 50(GFB P10-10) ...
Model Number:HC35 Place of Origin:Taiwan 1. Can cut holes up to 35mm thick. 2. The cutting length is 50mm. 3. Special designed cutting ed ...