Delivery Time: | 3~7days after order |
Supply Ability: | 1000 Unit/Units per Week |
Minimum Order Quantity: | 2 Set/Sets |
Payment Terms: | T/T,Western Union |
Port: | shanghai |
FOB Price: | US $30 - 150 |
fiber modem: | fiber modems |
Model Number: | BD-OP-E1 |
Brand Name: | BAUDCOM |
Place of Origin: | Shanghai China (Mainland) |
ORDER INFORMATION
BD-OP-E1/AC220V E1 fiber modem,sigle fiber 20km,power AC 220V
BD-OP-E1/DC-48V E1 fiber optic modem,sigle fiber 20km,power DC 48V
BD-OP-FE1/AC220V Framed E1 fiber optic modem,sigle fiber 20km,power AC 220V
BD-OP-FE1/DC-48V Framed E1 fiber optic modem,sigle fiber 20km,power DC 48V
Model name: BD-OP-E1
Product function: E1 fiber modem is to modulate framing (N*64Kbps) to single or multi-mode fiber. E1 time-slot, wavelength of ordinary fiber, and type of interface is
configurable. Suit for transmit additional management data channel in different fibers.The fiber for transmit data can be used to monitor and control local and remote devices, and no collision will
occur. It can also be used pair with V.35 fiber modem.
ENVIRONMENT REQUIREMENT:
Environment
The device operate temperature range wide, can work normally and stable in different environments.
Operate temperature: 0C~50C
Relative humidity: 95% (no condensation)
No causticity and impregnant gas, no rising dust, and no strong magnetic field disturbing.
Power supply
Use module power supply as following for option, working voltage range wide, good anti-disturb and isolation, work stable.
DC-48V: voltage range -36V~-72V
AC220V: voltage range 175V~265V
power consumption <5w
E1 interface match G.703
a. Rate: N*64Kbps(N=1~32)
b. Code: HDB3
c. E1 Impedance: 75ohm (unbalance) and 120ohm(balance).
Unbalance match with coaxial adapter, can match 75-2 coaxial wire. Balance match with balance adapter, can connect with twisted-pair wire.
d. Interface character: match G.703.
e. Connector: BNC(75ohm), RJ45(120ohm).
f. Jitter tolerance: fine than G.742 and G.823.
g. Clock: synchronize input E1 signal.
Fiber connector
Optical interface: SC/FC
Optical Wavelenth: FP1310 nm /DFB1550nm+/-50/40nm
Sending consumption: -9dBm/-5dBm
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity: <-36 (BER<10 -10):
Dynamic range receiving: >-30dB
Optical code: NRZ
Single mode : 9/125 um
Transmitting range: SM 20Km, SM 40Km, SM 60 Km, SM 120Km
DIMENSION
210mm (W) * 140mm (L) * 30mm (h)
optical multiplexer
optical multiplexer
E1 fiber modems,G.703 E1 to fiber converter,
framed or unframed E1
support BNC(75ohm) and RJ45(120ohm
AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber \"between the connectors\". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without ...
simplex armored fiber pathc cable with FC connectos, we supply good quality and service. the cable is rodent-resistant, and can take more crush. our products can be customized. if you have requirement, please contact us. ...
24 cores micro- armored fiber optic patch cord, blue LSZH jacket, SC and LC connectors data center application, 1,The cable with micro volume. 2, The spiral armored optical cable contains spiral armored tubes, which have obvious advantages in pressure resistance and ...
Structure from inside to outside: * Fiber:0.6mm tight buffer× 1 core * Spiral armored tube * Aramid yarn:1100D * Outer jacket:PVC/ LSZH/ PU * Cable diameter:3.0mm ...
Fiber optic power meter with vfl refers to an optical power meter that combines the functions of a visual fault locator (VFL). It is mainly used for continuous optical signal power measurement and fiber line continuity testing. It can be used for absolute power measurement and ...
An FTTH optical power meter (OPM) refers to an instrument used to measure absolute optical power or relative loss of optical power through a section of optical fiber. In fiber optic systems, measuring optical power is the most basic. By measuring the absolute power of the ...
light source for fiber optic cable refers to a light source whose output optical power, wavelength and spectral width are all stable. Of course, absolute stability is impossible, but its characteristics are relatively unchanged under given conditions (such as a certain ...
Splicing for fiber optic cable for sale is mainly used for the construction and maintenance of optical cable in optical communication, so it is also called optical cable fusion splicer. The general working principle is to use a high-voltage arc to melt the sections of the two ...
A fiber patch cord 10 meter is also known as a fibre optic connector, it is a fibre optic cable equipped with connectors at both ends. If a cable has only one connector, it is called a pigtail. Fibre optic patch cord usually has a thick protective layer, it is usually used to ...
Optical fiber interface is a physical interface used to connect optical fiber cables. FC is the abbreviation of ferrale connector. Its external reinforcement method is metal sleeve, and the fastening method is screw buckle. St interface is usually used for 10base-f, SC ...