2010 FX Nytro RTX SE Snowmobile

Performance

* Genesis 130FI 4-stroke engine
  The over-achieving Genesis 130FI engine is the heart of our lightweight, high performance and aggressive FX Nytro model family. It has dominated its class at the Old Forge Shoot-Out 2 years straight, claiming top speed twice and posting the best average ET over 4 runs down the ?-mile track. The advanced fuel injection keeps the 3-cylinder engine running at maximum 130 horsepower-class performance.
* Advanced fuel injection
  The Genesis 130FI uses Yamahas advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engines spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
* Engine braking reduction system
  The Genesis 130FI features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a coast feeling.
* Lightweight rear-exiting exhaust
  The patented rear exit design serves many performance-enhancing functions on the FX Nytro RTX SE. First, it maximizes horsepower by using a straight exhaust pipe design. Second, it reduces the amount of under-hood heat produced. Third, the rear-exiting design distributes weight to contribute to the excellent balance of the sled.
* Forced air radiator ducting
  The FX Nytro RTX SEs airflow design pulls fresh air in from around the headlight and forces it through the radiator fins for high cooling capacity, resulting in consistent engine performance even in low-snow conditions.
* 15x121x1.25-inch Camoplast Rip Saw track
  The Camoplast Rip Saw track is a standard feature on the FX Nytro RTX SE. It has been widely acclaimed in the industry as the best all-around OEM track for acceleration, cornering bite and everyday trail usage. The Rip Saw track development is the result of a collaborative effort between Yamaha and Camoplast. Churning the track is a pair of factory-engineered extrovert drive sprockets. The engineering team purpose-built these sprockets to work with the Ripsaw track and reduce vibration. Churning the track is a pair of factory-engineered extrovert drive sprockets. The engineering team purpose-built these sprockets to work with the Ripsaw track and reduce vibration.

 Handling

* FXG2 front suspension geometry
  The FX Nytro RTX SE features the acclaimed FXG2 front suspension with more trail and relaxed caster for crisp steering response and confidence-inspiring, flat handling in the corners and through the rough trail.
* Lightweight tunnel
  The FX Nytro RTX SE features a lightweight tunnel design. With the runningboards tipped up at an aggressive 11-degree angle, the FX Nytro RTX SE delivers big ground clearance for rough trail capability. The new design also features large snow evacuation and boot gripper punch outs. The lightweight tunnel was developed on the Pro Open snocross race sled.
* FX chassis with sport rider-forward position
  The compact design puts the engine down low and back in the chassis, leaving the top of the cab open for airflow. This gives the FX Nytro RTX SE a very centralized mass. The FX Nytro RTX SEs sport rider-forward ergonomic design puts the rider in an aggressive, yet comfortable, forward posture.
* Over-the-engine steering
  The snocross-proven over-the-engine steering configuration gives the rider excellent posture on the sled. It also allows the engine to be tucked deep into the chassis for optimum balance and mass centralization.
* Tall, hooked bars
  To match the tall and forward position, a single-piece, dual-hooked handlebar is standard fare on the FX Nytro RTX SE. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.
* Composite upper skeleton
  The headlight assembly and upper portion of the FX Nytro RTX SE is supported by a super-lightweight composite framework. By using a rugged, high tech composite material as the structure for the top portion of the sled, Yamaha engineers were able to keep the mass centered low and deep in the chassis.

 Comfort

* Dual Shock Pro 46 rear suspension
  The race-proven Dual Shock Pro 46 rear suspension is the culmination of four years of development, testing, racing and redevelopment to produce the ultimate big bump rear suspension. Built with competition spec reinforced arms and rails, the Dual Shock Pro 46 will be tough enough to handle extreme rough trail conditions. The new FX Nytro RTX SEs rear suspension is also kitted with an exclusive new three-way clicker shock on the rear arm and a two-way clicker shock on the front arm for ultimate adjustability.
* 3-way clicker rear shock
  The FX Nytro RTX SE features an industry-leading 46mm, 3-way clicker shock on the rear arm of its skid. Tuners will be able to adjust high speed and low speed compression damping plus the rebound rate is fully adjustable. This trick lightweight shock is rebuildable for additional tuning and years of dependable service.
* Fox FLOAT front shocks
  The new lightweight Fox FLOAT X shocks are packed with high tech features. They have a high rate negative spring, which allows the shock to run high air pressures in the main chamber for excellent roll control without compromising ride height, small bump compliance or traction. They use a remote reservoir design to maintain cool operating temperatures, which delivers great fade resistance on extremely rough trails. Fox FLOAT X shocks also feature dual compression and rebound damping clickers. Fox and Yamaha collaborated on the FLOAT X project for 2010.
* Wheels with removable bearings
  The newly designed wheels make the ride smooth and make maintenance easy. Now when the bearings need to be replaced you dont have to purchase a whole new wheel, just remove the old bearings and insert the new ones. The wheels also include a new spoke design and a rubber rim that make for a comfortable riding experience. This new design will be implemented on the rear large wheels as well as the internal smaller wheels.
* Sculpted narrow seat
  The FX Nytro RTX SE has a narrow seat for comfort. In addition to putting the rider in a tall, forward, attack posture, the seats height makes it plush and comfortable for a full day of riding. The narrow seat sits atop the beveled tunnel, which allows the track to be a traditional 15 inches wide, to maximize traction.
*

  New grip warmers
  The FX Nytro RTX SE receives new, redesigned grip warmers for 2010. These new grip warmers deliver a more concentrated heat source rather than spreading the warmth out. The result is a much warmer grip for your hands most comfortable riding position. In addition, an insulator has been inserted between the heating element and handlebar to retain heat longer and more efficiently.
* Digital gauge
  The digital gauge displays key information at a glance. Vehicle speed is displayed on a large LCD readout. In addition, the rider can select tachometer, odometer or tripmeter data to appear on the secondary readout. The gauge also displays system warning lights, fuel level, and warmer intensity.
* Quick-release, single-piece hood/console shroud
  The FX Nytro RTX SE has a single-piece hood and console shroud. The design allows owners to open and close the top portion of the sled easily with Dzus quick-connect fasteners.
* New graphic packages
  The FX Nytro RTX SE comes in one graphics package; the race inspired Yamaha Factory race graphics. This awesome design produces one of the best looking sleds on the snow.