Delivery Time: | within 10 days once upon received payment |
Package: | 40kg/set(A20 kgB20 kg); 400kg/set A200 kg B200 kg |
Supply Ability: | 20 Ton per Week as contact |
Minimum Order Quantity: | 200 Kilogram as contact |
Payment Terms: | L/C,T/T,Western Union |
Port: | shenzhen |
A:B: | 1:1 |
Model Number: | ADL3106 |
Brand Name: | Andalu |
Place of Origin: | Guangdong China (Mainland) |
Its the non-dangerous goods, and it should be transported as the common chemicals.
Keep in dry place, the shelf time is nine months(Below 25)
7.Storage and Transportation:
Specification:40kg/set(A20 kgB20 kg); 400kg/setA200 kgB200 kg
6.Package:
5This product should be avoided being mixed with another kind of organic tin catalyst such as amines, sulfur, phosphorus compounds and some metal salts.Otherwise,the catalyst of this product will be useless that the mixed material will not be cured.
4Its non-dangerous goods.But pls dont have it touch mouth or eyes .If it happens,pls flushing yourself quickiy with enough rinsing.
3It has the connection for curing time to temperature of the material, the lower for the temperature,the longer for its curing time.
2The mixed material should be in sealed storage and be used up during the safety operation,or itll slowly cure to wastage
1 Mixing A&B compenent equably before using.
5.Precautions:
Injection molding:Put the mixed material which has been defoamed into the mold.The injection molding should be made under appropriate pressure,temperature , cycle and other conditions.
pumped when there is no bubble. Deaeration time is suggested to be 5 to 10 minutes or so.If there is no deaeration device,the next step can be proceeded when there is no foam in the mixed material,usually one hour after mixing.
Whipping: Adding B to vessel with A then mixing equably.
Defoaming:: Put the mixture in the vacuum deaeration device.Usually,it should not be
Measurement: Be exact Metage for A and B components.
4.Usage:
2.0
2.0
2.0
2.0
2.0
%
Linear Shrinkage
13
12
11
10
8
%
Tensile set
30
30
35
35
15
N/mm
Tear Strength
300
400
550
500
400
%
Elongation At Break
7.0
8.0
8.0
7.5
6
Mpa
Tensile Strength
70
60
50
40
30
ShoreA
Hardness
1.14
1.13
1.10
1.08
1.07
g/cm3
Gravity
700
500
300
70
50
Pa.S
Voiscosity
Semi-transparent
Semi-transparent
Semi-transparent
Semi-transparent
Semi-transparent
Exterior
Item
ADL3106-70
ADL3106-60
ADL3106-50
ADL3106-40
ADL3106-30
Unit
Property Model No. 3.Technical parameters: ADL3106 serious has excellent elasticity and properties of anti-aging and resistence to high temperature afer curing under certain temperature(the temperature can be adjusted according to different demand).It has low linear shrinkage,resistence to impact fatigue,good thermal stability and cold resistence(the operating temperature is 60250).Below 20 ,the safe operating time in a sealed state after component A and B being mixed is 2 days.When the temperature becomes higher,the operating time will be shortened. 2.Features:
This product is high tensile injection mold RTV2 liquid silicone rubber.It is suitable for cook,orings, rubber covered roller,keypad, rubber wares and other silicone rubber products. 1.Application: Model No.:ADL3106serious ADL 3106 Injection Molding Silicone Rubber |
liquid Injection Molding Silicone Rubber
high tensile
for gasket, cook,orings, rubber covered roller,keypad, rubber wares,etc
color:semi-transparent Model Number:ADL3106 Brand Name:Andalu Place of Origin:Guangdong China (Mainland) Injection Molding Silicone Rubber fir Gasket 1. low linear shrinkage 2.hot-resistant 3.cold resistence ...
exterior:Semi-transparent hardness:30-70 Model Number:ADL3106-30, 40, 50, 60, 70 Brand Name:andalu Place of Origin:Guangdong China (Mainland) RTV2 liquid silicone rubber high tensile for injection mold for cook,orings, rubber covered roller,keypad, rubber wares ...
hardness:40-70 exterior:transparent Model Number:ADL3107-40, 45, 50, 60, 70 Brand Name:andalu Place of Origin:Guangdong China (Mainland) liquid silicone rubber for injection molding silicone rubber keypad, silicone rubber roller and other silicone products. ...
COLOR:ANY COLOR IS AVAIBALE Model Number:ALL MODES Brand Name:FY Place of Origin:Hebei China (Mainland) we provide various kinds of Silicone rubber products , any color and design are available. high quality and low price... ...
silicone gasket:white Place of Origin:Zhejiang China (Mainland) silicone gasket,rubber gasket,o-ring waterproof and oil-resistant available in various size and colors ...
Contact us for the details. gasket sealsealing ring,rubber ring,o ring,rubber seal,oil seal,rubber ring,seal ring,silicon o-ring,o gasket. , ...
Brand Name:SP Place of Origin:Zhejiang China (Mainland) rubber seal,oil seal,rubber ring,seal ring,silicon o-ring,o gasket ...
Model Number:YZ-SC023 Brand Name:Yizhou Place of Origin:Fujian China (Mainland) Material:Silicone Style:Mechanical Seal Standard or Nonstandard:Nonstandard High quality and top design. You are welcome to your own design. ...
Place of Origin:Zhejiang China (Mainland) Style:Oil sealing ring,rubber ring,rubber seal,oil seal,rubber ring,seal ring,silicon o-ring,o gasket ...