e1 converter (E1 to V35 Converter)bnc to v.35
Description
| Delivery Time: | 3~7DAYS AFTER ORDER |
| Supply Ability: | 1000 Set/Sets per Day |
| Minimum Order Quantity: | 2 Set/Sets |
| Payment Terms: | T/T |
| Place of Origin: | Shanghai China (Mainland) |
| Model Number: | BD-E1-V35 |
| Brand Name: | BAUDCOM |
Product Details
Product function: E1/V.35 (provides conversion between E1 and V.35 interface)
Product introduction:E1/ V.35 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048
Mbps data from E1channal and transmit the data to router, DDN, multiplexer or other equipment, thus providing secure and seamless communicating connection between equipments with different
interfaces in the network. It is widely applied in the interface between WAN and LAN and in video monitoring. The pattern of data interface is DCE, which can be connected with DTE or DCE
equipment.
Technical data:
E1 interface:
Interface standard: Conforms to G.703 standard
Interface rate: 2.048Mbit/S50ppm
Vibration characteristic: Satisfies G.742 and G.823 standard
Transmission capacity: 1*E1
Clock type: internal-clock, route clock
Connecter: BNC (75 ohm), RJ45 (120 ohm)
Interface impedance: 75ohm (non- balanced), 120ohm (balanced)
Working condition
Input voltage: AC220V; DC-48V;
Power consumption: <=5W
Operating temperature: 0C ~ 50C
Storing temperature: -40C ~ +70C
Relative humidity: 95 %
Ordering information:
E1-V35/AC E1-V35/V24 converter, 75ohm, 120 ohm, 220V
E1-V35/ DC48 E1/V35/V24 converter, 75 ohm, 120 ohm, DC-48V
Packing information
E1/V35/V24 interface converter 1
BNC connector (male) 2
E1/V35/V24 users manual 1
DB25-M34 wire 1
e1 converter
e1 converter
,G.703 standard E1 interface and standard V.35 interface converter,can be connected with DTE or DCE equipme
- Place of Origin:Shanghai China (Mainland)
- Model Number:BD-E1-V35
- Brand Name:BAUDCOM
Relate products of e1 converter (E1 to V35 Converter)bnc to v.35
Overview The 4 E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 – 4 E1 lines. The maximum bit rate is 7.8Mbps (4E1 lines). The 4E1 converter not only provides alarms and status of the E1 line but also ...
Overview As a key member of Baudcom “MetroEdge-Express” SDH/MSPP Product family, BD-STM1-TM series terminal multiplexer delivers bonded E1 lines, Ethernet services and V.35 links over legacy SDH networks. Installed at the customer site or directly on STM-1 access ...
Overview: As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, BD-E1-IP adopts the innovative TDM over IP technology, it transports the legacy E1/T1 data through the existing Ethernet or IP network ...
Overview The 4E1-4ETH Protocol Converters (Ethernet over TDM) are capable to support four network devices or other devices for remote centralized management. Remote users can perform centralized management for 4E1-4ETH series devices by Telnet, WEB Server or centralized ...
BD-16E1-4ETH-CON is 16E1 to 4 ethernet convergence protocol converter, which is multi-E1 convergency type bridge communication equipement. The device can be used as 16E1 to 4FE access gateway. The convergence converter’s bandwidth can be divided into 1~16channels according to ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
Overview The 8E1 to ethernet converter is the IP ethernet over TDM converter, which supports the conversion from MAC frames to 1 ?8 E1 lines. The maximum bit rate is 15.8Mbps (8E1 lines). The 8E1 converter not only provides alarms and status of the E1 line but also ...
E1 G.703 to 31channel RS232 converter,31 channel RS232 over E1 G.703 converter PRODUCT CHARACTERISTIC RS232 rate support 0~115200Kbps self-adapt; Support RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; PRODUCT CHARACTERISTIC RS232 rate ...
E1 G.703 to 8channel RS232 converter ,8 channel RS232 over E1 G.703 converter CHARACTERISTIC RS232 rate support 0~115200Kbps self-adapt; Support RS232 interface (TXD,RXD,GND) RS232 support hot-plug, connection to DTE or TCE device; offer 2 kinds of loop-return function, ...
E1 to Ethernet and RS232 converter could Plugging directly into the 10/100Base-T port of a hub or LAN switch, the E1 to Ethernet converter provides FE1 access at connection data rates of 2.048 Mbps, or nx64 (n=1 to 32 channels). The E1 to Ethernet and RS232 converter ...