Bending Beam Load Cell
Description
| Model Number: | BT - PL - RT - PS |
| Place of Origin: | Turkey |
Product Details
BT Series
This single ended shear beam loadcell is designed for high capacityautomatic filling machines It can be used in weighing platforms by thechange of up side down.The body of LT-5C is contructed in
hardened andnickel plated alloy steel .The cable joint and stainless steel coverssealed with Ip65 as well.
Accuracy Class 1000d
Comp. Temp. -10 ... +40?
Service Temp. -30 ... +70?
Sensitivity 2mV/V
Zero Balance ?%F.S
Nominal Exc. 5 ... 10V
Maximum Exc. 15V
Input Res. 380 ?20
Output Res. 350 ?3
Insulation@50V >2000M
Safe Load Limit % 150 F.S.
Ultimate Load % 300 F.S.
Lateral Load % 100 F.S.
Cable Type 2x2x0,22mm?individualy screened
Cable Length 3m
Capacity 10,20,50,100,200,500 kgf
PL Series
PL is designed for direct mounting of midsize weigh platforms.It issuitable for a wide range of applications,including bench scals checkweighing ,counting scales and process weighing.A humidty
resistantprotective coating assures long-term stability.the PL serie isconstructed in special aluminium and sealed to IP 66.
Accuracy Class 1000d
Comp. Temp. -10 ... +40?
Service Temp. -30 ... +70?
Sensitivity 2mV/V?10
Zero Balance ?%F.S
Nominal Exc. 5 ... 10V
Maximum Exc. 15V
Input Res. 380 ?20
Output Res. 350 ?3
Insulation@50V >2000M
Safe Load Limit % 150 F.S.
Ultimate Load % 300 F.S.
Lateral Load % 100 F.S.
Cable Type 2x2x0,22mm?individualy screened
Cable Length 1m
Platform Size 40x40cm
Model Capacity kgf.
PL-X 10
PL-3X 30
PL-L 50
PL-C 100
RT Series
This high capacity single point loadcell is designed for directmounting of large weigh platforms.it is suitable for a wide range ofapplications,including bench scales,check weighing,counting scales
andprocess weighing.A humidty resistant protective coating assureslong-term stability.the rt serie is constructed in special aluminiumand sealed to IP 66.
Accuracy Class 1000d,3000d(OIMLR60 C3 approved)
Comp. Temp. -10 ... +40?
Service Temp. -30 ... +70?
Sensitivity 2mV/V?10
Zero Balance ?%F.S
Nominal Exc. 5 ... 10V
Maximum Exc. 15V
Input Res. 380 ?20
Output Res. 350 ?3
Insulation@50V >2000M
Safe Load Limit % 150 F.S.
Ultimate Load % 300 F.S.
Lateral Load % 100 F.S.
Cable Type 2x2x0,22mm?individualy screened
Cable Length 3m
Capacity 100,300,600 kgf
PS Series
Altough the PS-4X is designed for low cost weighing platforms ,itfinds application invertical filling machines as well.Its small sizespecial aluminium construction and Ip66 sealing makes PS serie
suitedfor bench and counting scales.
Accuracy Class 1000d,3000d(OIMLR60 C3 approved)
Comp. Temp. -10 ... +40?
Service Temp. -30 ... +70?
Sensitivity 2mV/V?10
Zero Balance ?%F.S
Nominal Exc. 5 ... 10V
Maximum Exc. 15V
Input Res. 380 ?20
Output Res. 350 ?3
Insulation@50V >2000M
Safe Load Limit % 150 F.S.
Ultimate Load % 300 F.S.
Lateral Load % 100 F.S.
Cable Type 2x2x0,22mm?individualy screened
Cable Length 1m
Capacity: 6,10,20,40 kgf
BT Series
This single ended shear beam loadcell is designed for high capacity automatic
- Model Number:BT - PL - RT - PS
- Place of Origin:Turkey
You may also like
Relate products of Bending Beam Load Cell
TCHS load cell signal high speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second, suitable for continuous force measurement, instant force measurement, impact force testing and other test occasions. 1. The load ...
Digital modules are used to transform traditional analog sensors into digital sensors. Support Modbus RTU protocol, support TG ONE data acquisition management software, support customer custom communication protocol. Specification of Load Cell Digital Module Technical Parameter ...
The weighing amplifier/transmitter is a signal amplification device. Usually used in conjunction with a sensor, the load cell sensor amplifier can convert the mV signal output by the load cell into an analog current/voltage signal or a digital signal to output to the back-end ...
What is a load cell? The load cell is a kind of sensor, which means a load cell can convert force into a measurable electrical signal. There are various load cell weight sensor types, such as hydraulic load cells and pneumatic load cells, one of the most common is the ...
This product has good weather resistance, sealing property, and stable performance. Mainly provided to the high-voltage output substation project of the State Grid for monitoring and measuring the tension in the online monitoring system of transmission and transformation line ...
We usually call a sensor with a structure that is fixed at both ends and a force-bearing structure in the middle as a bridge type load cell, also called double ended beam load cell . This kind of load cell for sale is sometimes installed on the equipment as a structural ...
Column type tension load cell is a common type of tension force sensor. Our company has two types of column type tension load cells, internal thread and external thread. The internal thread has a smaller range. The maximum range of conventional stock is 20 tons, while the ...
column type load cell / column load cell calibrating a load cell canister load cell, cylinder load cell, cylindrical load cell, mechanical load cell The TJH-3 series load cells are column type compression load cells. This column type load cell is characterized by a wide range. ...
1. Dimension(4 wires): 185*134*35(mm) 2. Optional access modes of four, six and eight channels 3. Having a stainless steel shell, TJXH weighing junction box is beautiful and durable. It also has special sealing joints to ensure good sealing. 4. High precision, low drift ...
In the work, we often encounter the situation of using multiple sensors at the same time, and hope to save the collected data, so as to facilitate future inspection and analysis. For this reason, we designed the TG ONE data collection and management software to meet the needs ...