Type: | Petroleum Asphalt |
Brand Name: | PETROZON |
Place of Origin: | Iran (Islamic Republic of) |
Gilsonite is a natural Asphaltum,resinous hydrocarbon. This natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is soluble in aromatic and aliphatic solvents, as well as petroleum asphalt. Due to its unique compatibility, gilsonite is frequently used to harden softer petroleum products. Gilsonite in mass is a shiny, black substance similar in appearance to the mineral obsidian. It is brittle and can be easily crushed into a dark brown powder. Gilsonite is found below the earth's surface in vertical veins or seams that are generally between two and six feet in width, but can be as wide as 28 feet. The veins are nearly parallel to each other and are oriented. They extend many miles in length and as deep as 1500 feet. The vein will show up on the surface as a thin outcropping and gradually widen as it goes deeper. Due to the narrow mining face, Gilsonite is mined today, much like it was 50 or 100 years ago. The primary difference is that modern miners use pneumatic chipping hammers and mechanical hoists
Gilsonite Ash content between 8% - 10% below 11%
Production and delivery of lump per month at the moment 700 M/T
Packing
Gilsonite Gilsonite foundry additive for foundry sand pre-blends providing reduced smoke and emissions. It is packed in jumbo bag. ...
Natural Asphalt deposits are in petroleum areas. Mostly petroleum reservoirs exposed to surface. One of the most important areas who mined since 1940 is the asphalt deposits of PUB-LTD Gilsonite has high bond capability due to resin effect to make the asphalt more water proof. ...
PURE OXIDIZED (BLOWN) BITUMEN 115/15 SPECIFICATION OF OXIDIZED BITUMEN 115/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10-20 D-5 Softening point ˚C 110-120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C 230 min D-92 ...
PURE OXIDIZED (BLOWN) BITUMEN 110/30 SPECIFICATION OF OXIDIZED BITUMEN 110/30 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-35 D-5 Softening point ˚C 110 -120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 ...
SPECIFICATION OF PURE OXIDIZED (BLOWN) BITUMEN 95/25 SPECIFICATION OF OXIDIZED BITUMEN 95/25 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-30 D-5 Softening point ˚C 90-100 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C ...
PURE OXIDIZED (BLOWN) BITUMEN 90/40 SPECIFICATION OF OXIDIZED BITUMEN 90/40 DESCRIPTION SPECIFICATION TEST METHOD Specific gravity @25/25˚C 1.05 approx D-70 Penetration@25˚C 35 – 45 D-5 Softening point ˚C 85 -95 D-36 Ductility@25˚C 5.5 min ...
PURE OXIDIZED (BLOWN) BITUMEN 90/15 SPECIFICATION OF OXIDIZED BITUMEN 90/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10 - 20 D-5 Softening point˚ C 85 -95 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 ...