Gilsonite
Description
| Type: | Action |
Product Details
Gilsonite is AGC's brand name for the mineral known as asphaltum, uintaite or uintahite, which is found in commercial quantities only in two places the Uintah Basin of northeastern Utah, and in
other forms in other nations. This unique mineral is used in more than 160 products, primarily in dark-colored printing inks and paints, oil well drilling muds and cements, asphalt modifiers,
foundry sands additives and a wide variety of chemical products. We are the actual mandates of this product and we are accepting "agents" at the present.
Specifications:
Gilsonite, or asphaltum, natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is soluble in aromatic and
aliphatic solvents, as well as petroleum asphalt.
Gilsonite, or asphaltum, natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltit
- Type:Action
Relate products of Gilsonite
Gilsonite Gilsonite foundry additive for foundry sand pre-blends providing reduced smoke and emissions. It is packed in jumbo bag. ...
Natural Asphalt deposits are in petroleum areas. Mostly petroleum reservoirs exposed to surface. One of the most important areas who mined since 1940 is the asphalt deposits of PUB-LTD Gilsonite has high bond capability due to resin effect to make the asphalt more water proof. ...
PURE OXIDIZED (BLOWN) BITUMEN 115/15 SPECIFICATION OF OXIDIZED BITUMEN 115/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10-20 D-5 Softening point ˚C 110-120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C 230 min D-92 ...
PURE OXIDIZED (BLOWN) BITUMEN 110/30 SPECIFICATION OF OXIDIZED BITUMEN 110/30 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-35 D-5 Softening point ˚C 110 -120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 ...
SPECIFICATION OF PURE OXIDIZED (BLOWN) BITUMEN 95/25 SPECIFICATION OF OXIDIZED BITUMEN 95/25 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-30 D-5 Softening point ˚C 90-100 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C ...
PURE OXIDIZED (BLOWN) BITUMEN 90/40 SPECIFICATION OF OXIDIZED BITUMEN 90/40 DESCRIPTION SPECIFICATION TEST METHOD Specific gravity @25/25˚C 1.05 approx D-70 Penetration@25˚C 35 – 45 D-5 Softening point ˚C 85 -95 D-36 Ductility@25˚C 5.5 min ...
PURE OXIDIZED (BLOWN) BITUMEN 90/15 SPECIFICATION OF OXIDIZED BITUMEN 90/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10 - 20 D-5 Softening point˚ C 85 -95 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 ...