Gilsonite for foundry sand |
Physical Sand properties with Gilsonite resin are equal or superior to seacoal at significantly lower additive levels. Gilsonite improves sand density, water requirements and strength (green, dry, baked, and hot). Gas evolution curves show that Gilsonite volatilizes more rapidly than seacoal. Gilsonite has the same total volatiles as seacoal at one-third the additive level.
Gilsonite Gilsonite foundry additive for foundry sand pre-blends providing reduced smoke and emissions. It is packed in jumbo bag. ...
Natural Asphalt deposits are in petroleum areas. Mostly petroleum reservoirs exposed to surface. One of the most important areas who mined since 1940 is the asphalt deposits of PUB-LTD Gilsonite has high bond capability due to resin effect to make the asphalt more water proof. ...
PURE OXIDIZED (BLOWN) BITUMEN 115/15 SPECIFICATION OF OXIDIZED BITUMEN 115/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10-20 D-5 Softening point ˚C 110-120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C 230 min D-92 ...
PURE OXIDIZED (BLOWN) BITUMEN 110/30 SPECIFICATION OF OXIDIZED BITUMEN 110/30 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-35 D-5 Softening point ˚C 110 -120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 ...
SPECIFICATION OF PURE OXIDIZED (BLOWN) BITUMEN 95/25 SPECIFICATION OF OXIDIZED BITUMEN 95/25 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-30 D-5 Softening point ˚C 90-100 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C ...
PURE OXIDIZED (BLOWN) BITUMEN 90/40 SPECIFICATION OF OXIDIZED BITUMEN 90/40 DESCRIPTION SPECIFICATION TEST METHOD Specific gravity @25/25˚C 1.05 approx D-70 Penetration@25˚C 35 – 45 D-5 Softening point ˚C 85 -95 D-36 Ductility@25˚C 5.5 min ...
PURE OXIDIZED (BLOWN) BITUMEN 90/15 SPECIFICATION OF OXIDIZED BITUMEN 90/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10 - 20 D-5 Softening point˚ C 85 -95 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 ...