Gilsonite for Ink , Paint and Coat |
Gilsonite resin is used by asphalt producers, road paving engineers and paving contractors who are concerned with PG specifications, high performance and cost effectiveness. Gilsonite, long known as a bitumen reinforcer and hardening agent, also offers a unique combination of high performance and economy for high stress paving, as well as preservation applications. A significant benefit of Gilsonite is in producing road pavement mixes of higher stability than conventional ones.
Gilsonite Gilsonite foundry additive for foundry sand pre-blends providing reduced smoke and emissions. It is packed in jumbo bag. ...
Natural Asphalt deposits are in petroleum areas. Mostly petroleum reservoirs exposed to surface. One of the most important areas who mined since 1940 is the asphalt deposits of PUB-LTD Gilsonite has high bond capability due to resin effect to make the asphalt more water proof. ...
PURE OXIDIZED (BLOWN) BITUMEN 115/15 SPECIFICATION OF OXIDIZED BITUMEN 115/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10-20 D-5 Softening point ˚C 110-120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C 230 min D-92 ...
PURE OXIDIZED (BLOWN) BITUMEN 110/30 SPECIFICATION OF OXIDIZED BITUMEN 110/30 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-35 D-5 Softening point ˚C 110 -120 D-36 Ductility@25˚C 2 min D-113 Loss on heating (wt)% 0.2 max D-6 ...
SPECIFICATION OF PURE OXIDIZED (BLOWN) BITUMEN 95/25 SPECIFICATION OF OXIDIZED BITUMEN 95/25 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 20-30 D-5 Softening point ˚C 90-100 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 Flash point ˚C ...
PURE OXIDIZED (BLOWN) BITUMEN 90/40 SPECIFICATION OF OXIDIZED BITUMEN 90/40 DESCRIPTION SPECIFICATION TEST METHOD Specific gravity @25/25˚C 1.05 approx D-70 Penetration@25˚C 35 – 45 D-5 Softening point ˚C 85 -95 D-36 Ductility@25˚C 5.5 min ...
PURE OXIDIZED (BLOWN) BITUMEN 90/15 SPECIFICATION OF OXIDIZED BITUMEN 90/15 DESCRIPTION SPECIFICATION TEST METHOD Penetration@25˚C 10 - 20 D-5 Softening point˚ C 85 -95 D-36 Ductility@25˚C 1.5 min D-113 Loss on heating (wt)% 0.2 max D-6 ...