Multi Tool CAS1-4 Key Programmer For BMW Multi Tool

  • Place of Origin:CN
  • Minimum order:1

Multi Tool CAS1-4 Key Programmer Version is V7.7. For BMW Multi Tool is more powerfull than AK300. Multi tool key programmer Supports CAS 1 CAS2 CAS3 CAS3+ CAS4 CAS4+ key programming.


Multi Tool CAS1-4 Key Programmer For BMW Multi Tool

Software Version: V7.7, software keeps updating online.

Supports English Only. More Powerful Than AK300!

Notice:

1. Make Sure Connect Dongle to Computer Before Run the Software.
2. Supports CAS4 programming, but needs CAS4 adapter

For BMW multi tool Component:

1. OBD II CONNECTOR: Connects the tool to the vehicle\'s Data Link connector (DLC).
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.

Multi tool for BMW Specifications:

1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W
7. Dimensions: Length 95 mm, Width 49 mm, Height 28 mm

For BMW MULTI TOOL supported function including:

1. Car access sytem dentification
2. Read/Write CAS EEPROM(OBDII)
3. Read/Write KM stored in CAS system(OBDII)
4. Read/Write synchronization codes stored in CAS system(OBDII)
5. Synchronize DME and CAS(OBDII)
6. Synchronize CAS and ELV(OBDII)
7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
8. Read/Restore CAS KEY information(OBDII)
9. Disable/Enable key with working key(OBDII)
10. Clear DTC and Shadow (OBDII)
11. Prepare dealer key with CAS eeprom dump
12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information
13. Change KM in CAS and instrument dashboard with file dump
14. Have key programmer, you can programm dealer key directly.

Pay Attention to the Function: Help->Device update.
You can get the latest software version and firmware verion when you can access to internet.

China CablesMall Technology Co.,LTD

Rom 202, tangshuiwei Area, block 8, mingzhi , Shenzhen Tel: 86-755-29418108 Country: China (Mainland)