Paint for Wood Floors for Wooden Interiors
Quick Detail
- Minimum order:1
- Place of Origin:Italy
Specifications
PAINT FOR WOOD FLOORS FOR INTERIORS
COMPOSITION
Acrylic Polyurethane resin, boiled linseed oil, fluoropolymers, resin-wax emulsions, essences, water.
PROFILE
Designed to protect parquet, PRIMO LEGNO is a special paint that gives structures a natural, soft appearance.
IMPORTANT: For regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
INTENDED USE
PRIMO LEGNO offers a stain and dirt resistant treatment and an excellent protection against water, on all types of wood.
INSTRUCTIONS
Mix well before use. Use at temperatures above +10°C.
- Apply a first coat with a paintbrush, waxing fleece (if applied whilst working) or sprayer.
- Leave to dry for at least 2 hours (at 20°C), then smooth with sandpaper (grade 320/400).
Apply a second coat. Wait for 2 hours (at 20°C), then apply the last coat by adding INDUR K-33 mixing 80 g. per litre (refer to technical specifications). Apply the product in the same way.
Let it dry for at least 6 hours before walking on the floor. Can be used as a finishing on a treatment with Olio di Luna and Natural Parquet (see sheet). Always run some test applications before applying it to the definitive surfaces.
PROS
• High permeability to water vapour.
• Enables room repairs with no colour discrepancies.
• Solvent-free.
• High protection and resistance.
• High resistance to UV.
• The wood keeps its natural appearance.
• Does not harm the environment.
• Over 90% biodegradable.
• Facilitates removal of black marks.
PROPERTIES
DILUTION: Ready for use.
DRYING: 6 hours.
WALKABLE: after 2 hours.
TIME OF REACTION: 6 days.
YIELD: Approximately 18-26 sqm/l per coat.
HOW TO CLEAN EQUIPMENT: Wash with soap and water.
STORAGE: Closed in the original package, in a cool place, away from frost and UV rays, it will keep unaltered for at least one year.
PACKAGING:
12 1-litre bottles
4 5-litre buckets
2 10-litre buckets
CHARACTERISTICS
APPEARANCE: liquid
COLOUR: milky
ODOUR: characteristic
PH (A 20°C): 8.4
SOLUBILITY IN WATER: total
SPECIFIC WEIGHT (20° C): 1.025 kg/l
ACTIVE INGREDIENT (20°C): 22%
VOC (Directive 2004/42/EC) : Interior/exterior trim varnishes and wood stains.
VOC given in g/liter of product in a ready-to use condition :
Limit value: 130,00 (2010)
VOC of product : 25,04
HEALTH
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements).
Hazard statements:
EUH210 Safety data sheet available on request. EUH208 Contains: 1,2-Benzoisothiazol-3(2H)-one May produce an allergic reaction.
No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.
COMPOSITION
Acrylic Polyurethane resin, boiled linseed oil, fluoropolymers, resin-wax emulsions, essences, water.
PROFILE
Designed to protect parquet, PRIMO LEGNO is a special paint that gives structures a natural, soft appearance.
IMPORTANT: For regular cleaning, do not use alcohols, or acid, solvent or ammonia based-detergents.
INTENDED USE
PRIMO LEGNO offers a stain and dirt resistant treatment and an excellent protection against water, on all types of wood.
INSTRUCTIONS
Mix well before use. Use at temperatures above +10°C.
- Apply a first coat with a paintbrush, waxing fleece (if applied whilst working) or sprayer.
- Leave to dry for at least 2 hours (at 20°C), then smooth with sandpaper (grade 320/400).
Apply a second coat. Wait for 2 hours (at 20°C), then apply the last coat by adding INDUR K-33 mixing 80 g. per litre (refer to technical specifications). Apply the product in the same way.
Let it dry for at least 6 hours before walking on the floor. Can be used as a finishing on a treatment with Olio di Luna and Natural Parquet (see sheet). Always run some test applications before applying it to the definitive surfaces.
PROS
• High permeability to water vapour.
• Enables room repairs with no colour discrepancies.
• Solvent-free.
• High protection and resistance.
• High resistance to UV.
• The wood keeps its natural appearance.
• Does not harm the environment.
• Over 90% biodegradable.
• Facilitates removal of black marks.
PROPERTIES
DILUTION: Ready for use.
DRYING: 6 hours.
WALKABLE: after 2 hours.
TIME OF REACTION: 6 days.
YIELD: Approximately 18-26 sqm/l per coat.
HOW TO CLEAN EQUIPMENT: Wash with soap and water.
STORAGE: Closed in the original package, in a cool place, away from frost and UV rays, it will keep unaltered for at least one year.
PACKAGING:
12 1-litre bottles
4 5-litre buckets
2 10-litre buckets
CHARACTERISTICS
APPEARANCE: liquid
COLOUR: milky
ODOUR: characteristic
PH (A 20°C): 8.4
SOLUBILITY IN WATER: total
SPECIFIC WEIGHT (20° C): 1.025 kg/l
ACTIVE INGREDIENT (20°C): 22%
VOC (Directive 2004/42/EC) : Interior/exterior trim varnishes and wood stains.
VOC given in g/liter of product in a ready-to use condition :
Limit value: 130,00 (2010)
VOC of product : 25,04
HEALTH
The product is not classified as hazardous pursuant to the provisions set forth in EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements).
Hazard statements:
EUH210 Safety data sheet available on request. EUH208 Contains: 1,2-Benzoisothiazol-3(2H)-one May produce an allergic reaction.
No danger symbol is required on the label It must nevertheless be kept out of the reach of children and must not be disposed of in drain water, in order to protect the environment. We nevertheless advise you to adopt good work practices.
