Needle Flame Testing equipment for evaluating fire hazard
Quick Detail
- Minimum order:1
- Place of Origin:china
Specifications
The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Introduction
Technical Parameters
| Items | Parameters |
| Specimen | Synthetic materials |
| Test standards | DIN EN 60695-11-5 |
| Sensor | Temperature |
| Power supply | 230 VAC / 15 VA |
| Dimension | 500 x 400 x 300 mm (W x D x H) |
| Weight |
15g |
