Two-Axis Position Rate Turntable
Quick Detail
- Minimum order:1
- Place of Origin:Wuhan china
Specifications
| Two-Axis Position Rate Turntable | ||
Inner Axis（azimuthal） |
Outer Axis（pitch） | |
| Function | This device has the function of position and rate, it can provide the benchmark of precise single and two axis positioning and rate for the tested load, it’s used for static testing and calibration of inertial original components, inertial navigation systems. | |
| Axis Orientation | Horizontal（UT） | |
| Payload Weight | 5-40kg | |
| Dimension of Table Surface | 200-500（mm） | |
| Magnetic Leakage | ≤2 Gauss（20mm from the table surface） | |
| Material of The Table | Stainless Steel | |
| Table flatness | 0.015mm | |
| Table Wobble | 0.02mm | |
| Perpendicularity of Two-Axis | ±3″ | |
| Motion Error of Axis | ±2″ | ±3″ |
| Angular freedom | Continuous | Continuous |
| Position Accuracy | ±2″ | ±3″ |
| Position Resolution | 0.5″ | 0.5″ |
| Rate Range | ±0.005°/s~±600°/s | ±0.005°/s~±400°/s |
| Rate Resolution | 0.001°/s | 0.001°/s |
| Peak Acceleration | 300°/s2 | 200°/s2 |
| Conductive Slipring | 40 rings/3A | |
| Remote Control Interface | RS232/RS422 | |
| Other |
The remote control interface can be adjusted by user’s requirements； The quantity of conductive slip ring can be adjusted by user’s requirements； The dimension of table can be adjusted by user’s requirements； Technical parameter can be adjusted by user’s requirements. |
