Tobee® 8/6 F AH Process Water Make-Up Pump

Tobee® 8x6E-AH Slurry Pump
SPECIFICATIONS:

Size: 8\" x 6\" Capacity: 360-828m3/h Head: 10-61m Speed: 500-1140rpm NPSHr: 2-9m Eff.: 72% Power: Max.120kw Handling solids: 63mm

Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

8x6E-AH Slurry Pump is used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications, Sometimes, it could also be used in dredging and drilling mud application etc.

Design Features:

√ Bearing assembly - large diameter shaft with short overhang contributes to long bearing life.

√ Liners - easily replaceable liners are bolted, not glued to the casing for positive maintenance.

√ Casing - Casing halves of cast or ductile iron provide high operating pressure capabilities.

√ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal.

8x6 E AH Slurry Pump Data Sheet:

Model	Max. Power (kw)	Materials	Clear Water Performance	Impeller Vane No.
Liner	Impeller	Capacity Q (m3/h)	Head H (m)	Speed n (rpm)	Eff. η (%)	NPSH (m)
8/6E-AH	120	M	M	360-828	10-61	500-1140	72	2-9	5

8x6 E AH Slurry Pump Applications:

• Mining	• Gypsum	• Limestone	• Mineral processing
• FGD	• Chemical slurries	• Tailings	• Lime slurries
• Ash handing	• Cyclone feeds	• Waste sludge	• Coarse sand
• Lime mud	• Phosphoric acid	• Dredging	• Construction
• Alumina Industry	• Power Plant	• Potash Fertilizer Plant	• Other industries