The Slotted Body Insert has been designed for use in plastics and thin gauge sheet metal applications |
The Slotted Body Insert has been designed for use in plastics and thin gauge sheet metal applications where increased pull-out resistance is required. The round body has four slotted segments that fold outward from the hole center as the insert is installed, to grip the host material from the backside. They can be used in single, variable or multiple thicknesses of materials with no adjustments, when installed with proper hand or pneumatic torque tools. These inserts are standard with a round head, or order a square head to be used in embossed or molded square-shaped recesses for maximum spin out resistance. KEY BENEFITS:Plastics and Thin Gauge Sheet MetalsVarying Thickness Materials without adjustment, using torque stall type tools available through EFC InternationalExceptional Pull Out Resistance even in hand-drilled or over-sized holesSuperior Corrosion Resistance since all surfaces of the body are plated.Superior Thread Strength due to internal roll threading process Quality Installation - Locate special installation tools anywhere in assembly, even in variable thickness materials, before or after finish. * Please contact EFC International for square-head part numbers or materials and finishes not listed here. Special orders are subject to minimum order requirements. Note 1: Grip ranges stated below can be achieved using pull type installation tools and may be variable based on hole size and parent material density. EFC recommends trial installations to determine actual grip range in the application. Note 2: Grip ranges will be less than stated below when using torque type installation tools, and will be affected by the tool RPM speed, stall torque, hole size and parent material density. EFC recommends trial installations to determine actual grip.MATERIAL: Steel 1010/1008 FINISHES: Zinc Trivalent Chromate - ROHS compliantTin-Zinc Trivalent Chromate - ROHS compliantZinc /Yellow Dichromate per ASTM-B-633 Type II FE/ZN .0003 (8u) with Clear Protective Coating Yellow Tin Zinc per BPS-TZ-327 .0003 (8u) with Clear Protective CoatingAvailable Materials:See Above Available Finish:See Above
Fully automatic, our high speed rollformer is designed with a Cassette-type platform and a quick-change machine base so as to better achieve multi-profile purposes. The production speed of this high speed metal forming series is optional from 20m/min to 60m/min.Similar to other ...
Customized support: OEM Place of Origin: China,Zhejiang Brand Name: BJERGSEN Model Number: 21007 Type: Center Drill Bit, Core Drill Bit Use: Cast Iron, Brass, Aluminum, Stainless Steel Working Length (mm): - Finish: other, Painting Package: Double blister,Plastic Box,Color ...
Warranty: - Customized support: OEM Place of Origin: Zhejiang,China Brand Name: BJERGSEN Model Number: 21003 Type: Center Drill Bit, Core Drill Bit Use: Cast Iron, Brass, Aluminum, Stainless Steel Working Length (mm): - Finish: other, Painting Package: Double blister,Plastic ...
Model DDH-45T Capacity TON 45 Capacity occur point MM 1.6 Stoke MM 30 Stoke per minute S.P.M 150-700 Bloster area MM 750×550 Bed opening MM 550×125 Slide area MM 750×380 Die height adjustment MM 240-290 Die height adjustment motor KW 0.4 Feed line height MM 135±15 Main ...
Model HC-65T Capacity TON 65 Stroke MM 30 40 50 Stroke per minute S.P.M 200-700 200-600 200-500 Die height MM 215-265 210-260 205-255 Bloster area MM 890*580*130 Bed opening MM 150*450(550) Slide area MM 600*400 Slide adjustment MM 50 Main motor HP 15 Gross weight TON 9.2 ...
Mainly applied to the automatic laser markingfor nameplate, the main materials are aluminum and stainless steel Supporting various nameplate sizes, the minimum size is 25mm x 40mm, the maximum is 120mm x 120mm Automatically grabbing nameplate, positioning, marking and receiving ...
ZP6108 High Speed Directional Pulse Hole Metallizing I. Introduction Structure ★1.Use high speed pulse power source for plating, supply uniform good quality coating. ★2.Fully ABS engineer plastic machine body and inner groove, with antiseptic, thermo stability, technology ...
ZP6105 High Speed Directional Control Pulse Punching Metallized Equipment I. Structure 1. Using special high-speed reversing pulse electroplating power, provide uniform quality coating quality. 2, Full ABS engineering plastic airframe and internal channel, corrosion seismic ...
Technical information of ZM3C high speed reversing pulse punching metal equipment: 1.Four slot structure,has pickling,soaking conductive adhesive,activation,electroplating function. 2.Use transparent clamshell function,it is convenient for observation and save. 3.Maximum board ...
surface treatment:plastic coating Depth:450-600mm Size:3500*1200*5000 Material:Metal Model Number:ld Brand Name:MIDI-rack Place of Origin:Jiangsu China (Mainland) Rivet Metal Rack 1.light weight of the rack 2.less invested,widely used 3.rack assembled freely ...