Peanut Shell Pellet Maker for Sale/Peanut Shell Pellet Machine

Due to high burn rate and easy to store of peanut shell pellets, it can be used for the civil heating and daily energy. Meanwhile, peanut shells can also replace coal briquettes as the main fuel for industrial boilers, with cost reduction and environmental health. It can be used as fuel for power generation. The energy density of peanut shell pellets equivalent to that of intermediate bituminous, with long-lasting fire, good combustion performance, high burn rate.

/

Peanut shell pellet maker for sale/peanut shell pellet machine is the equipment which uses peanut shell, corn stalk, wheat straw, crop straw, corn cob, cotton stalk, soybean pole, weeds, branches, leaves, sawdust, bark and other solid waste as raw material to make the small stick solid particle fuel after grinding, pressure adding and density increasing processes. The pellet fuel after forming is a new type of bio energy, which can be used in place of wood, coal, fuel oil, liquefied gas, etc. peanut shell pellet is widely used for heating, cooking, hot water boilers, industrial boilers, biomass power plant and so on, which has the advantages of flame resistance, convenient storage and transportation.

Peanut shell pellet maker for sale/peanut shell pellet machine can be applied to press the shapless biomass materials with low adhesiveness such as the rice husk, sunflower seed husk, peanut shell, etc. Fote peanut shell pellet maker for sale/peanut shell pellet machine can be widely used in the feed plant, wood processing, fuel plant, etc. It is an ideal pelleting machine with low investment and high profit.

Peanut shell pellet maker for sale/peanut shell pellet machine has adopted forced feeding and overload protection device which makes it homogeneous with no obstruction, low noise, and much safer and credible for operation. Modulator with large diameter has ben used in this machine to make materials fully cured, and make the pellet smooth, hardness much more proper. The formation rate reaches to 98% and the equipment wear rate has been reduced to the minimum.

/

Pelletizing Process of Peanut Shell Pellet Maker for Sale/Peanut Shell Pellet Machine:

Firstly, if the raw material is larger than 1/4', it should be broken down in the hammer mill to a smaller particle size.

Secondly, dry the materials in a dryer up to 600 degrees Fahrenheit to get rid of moisture. The favorite pelletizing moisture content is about 13%-15%.

Third, put the substance through a pellet mill or press. The machine will squeeze through a die that has holes. Then pellets will be produced. Keep high pressure on the pellets. Make sure the press machine remains at a high pressure so it will ensure the wood to soften lignin (a natural bonding substance) and hold the pellet together naturally.

Then, The temperature and moisture content of wood pellet is usually much higher after pelleting. In this situation, you need a cooler to reduce pellets temperature and moisture content for better storage purpose.

Last but not least, you need a packing machine to pack your pellets to stop them from getting damp for better storage.

/

Contact Infomation

Email: info@sinoftm.com

Website: http://www.woodpelletmillchina.com/pro/peanut_shell_pellet_mill.html

Address: High and New Industrial Zone, Kexue Revenue, High and New Technology Industrial Development Zone, Zhengzhou, China